EcoProTec – Cement, Grout & Salt Residue Remover

Description

Always test/practice on an inconspicuous area before
proceeding to ensure that the finished result is satisfactory. This product is not suitable for highly polished natural stones.
Shake container well before use.

In mild cases and on non-absorbent surfaces: Dilute 1 part
Cement, Grout & Salt Residue Remover in 4 parts cool water. Apply evenly to the surface using a light pressure sprayer or
watering can. Leave for up to 30 minutes, keeping surfaces wet with more solution if necessary. Scrub with a deck brush or
nylon scrubbing pad and rinse with water.

In more severe cases: Dilute 1 part Cement, Grout & Salt
Residue Remover in 1-part cool water. Apply liberally and agitate immediately using a deck brush, a nylon scrubbing pad, or a rotary scrubbing machine. Leave for 5-10 minutes, keeping
surfaces wet with additional solution. Scrub again and rinse with water.

In extremely severe cases: Dampen the surface with a little water and apply undiluted. Agitate with a nylon pad, a scrubbing brush, or a mechanical scrubber. Immediately extract using a
good quality sponge or wet vac and rinse thoroughly with clean water. N.B. Always rinse surfaces thoroughly with cool clean water.